Gigaset N670 IP PRO Installation, Configuration And Operation page 12

First steps
Connecting to the LAN
You can connect the N670 IP PRO to your local network via a router or switch. A VoIP PBX is
required for Internet telephony. This must be accessible via the local network and must have
network access.
You also need a PC connected to the local network, so that you can configure your telephone
system via the web configurator.
For each device to be connected to the local network an Ethernet cable is required.
1
Pull up the upper part of the housing and fold it forwards
Insert a plug from an Ethernet cable into the LAN connection socket at the top of the
device .
2
Insert the second Ethernet cable plug into a LAN socket for your local network or on the PoE
switch .
3
Close the flap.
Data protection notice
Once the device is connected to the Internet, it automatically contacts the Gigaset
support server to make it easier for you to configure the devices and to enable
communication with Internet services.
For this purpose, the system sends the following information when it is started and
then once a day:
•
MAC address
•
Device name
•
Number of registered handsets
•
Number of connected base stations
•
Number of connected DECT managers
•
License information
•
Software version
On the support server, this information is linked to the existing device-specific infor-
mation:
•
System-related/device-specific MAC address - MAC address password
12
2
.
1
3