Gigaset N670 IP PRO Installation, Configuration And Operation page 28

Base stations
Enabling/Disabling LED status display at the base station
LED displays are enabled by default on all base stations.
Select Yes/No to enable/disable the LED display on all base stations.
Pending base stations
The Pending base stations list shows the automatically recognised DECT base stations in the
network that have not yet been registered. To integrate them into your DECT network, they need
to be confirmed and activated.
The base stations are identified by their MAC address.
Assigning a base stations to your DECT manager
Click on in the row of the base station you want to add to your system . . . the data page
for the base station is opened.
Adding/Editing base stations
On this page you enter the data for a base station to be added to the DECT manager or edit the
data for a base station that is already assigned to the DECT manager.
It is only available in the Integrator user interface for the user role admin.
The following information is displayed and cannot be changed:
MAC address
Hardware address of the base station. With this address the device can be uniquely identified
within the Ethernet. It cannot be changed
DM Name
Name of DECT manager the base station belongs to. local: The base station belongs to the
configuring device.
Status
Synchronization status of the base station:
Offline
Deactivated
No sync
Sync
Sync overload
IP address
Current IP address of the Base station.
28
Not available
Available, but not activated
Activated, but not synchronised
Activated and synchronised
Synchronised, but DECT overload; attempts were made at this base station
to initiate more than the permitted simultaneous calls.