Gigaset N670 IP PRO Installation, Configuration And Operation page 18

Configuring the system
Logging in the first time
You will be asked to change the default password and to set the appropriate radio frequency
band.
Enter a new password in the New password field and repeat it in the Repeat password field
The password must contain:
•
at least one upper-case character
•
at least one number
•
at least one special character
•
from 8 to 74 characters
Select the radio frequency band used in your region from the list (
If you want to activate the functions "Mulit-line operation" and "internal telephony" (
your device:
Select the role All in one + internal telephony - dynamic IP from the Reset to device options
menu.
Click on Set to save the settings and to open the administrator interface.
If you do not make any entries for a lengthy period (approx. 10 minutes), you are auto-
matically logged off. The next time you try to make an entry or open a web page, the
login screen is displayed again. Enter the password again to log back in.
Any entries that you did not save on the telephone system before automatic logoff
will be lost.
Logging off
You will find the log off function at the top right of each web page, below the product name.
Click on Logout
The session is automatically terminated after ten minutes of inactivity.
Always use the logout function to end the connection to the web configurator. If, for
example, you close the web browser without logging off beforehand, access to the
web configurator may be blocked for a few minutes.
Changing language
You can change the language at any time.
From the option menu
language.
Licence terms
The login screen provides information on the open source software included in the product.
In the lower right corner of the login screen click on Licence terms.
18
at the top right of any web page select the desired
Language
p. 84).
p. 9) for