Gigaset N670 IP PRO Installation, Configuration And Operation page 27

Status Synchronization status of the base station:
Offline
Deactivated
No sync
Sync
Sync overload
Actions
Editing base station data
Click on next to the base station you want to edit . . . the data page for the base station
is opened.
Displaying detailed statistical data on the base stations
Click on the button next to the name of a base station . . . statistical evaluations about
the base station synchronisation as well as further system information are output.
Deleting base station
Select the check box of one or more base stations
All selected base stations are deleted. They are shown in the list of pending base stations
again.
Exporting/Importing the base station configuration
You can export the base station configuration and import it into another DECT manager, in order
to change the DECT manager assignment.
This function can be used if the device is operated behind an external integrator
(device role DECT-Manager+Base) and is to be replaced by another device.
Exporting:
Select all base stations you want to be transferred via the check mark
address.
Click on Export
file selection dialogue.
Importing:
Click on Import
computer's file system.
Select the DECT manager into which base station export should be imported from the DM
Name list and the IP address type from the corresponding list.
The export contains all data. The import does not contain the data of the local base
station, because the local base station is physically bound to the (potential) new
DECT manager.
Please review your sync settings after a base station import.
Not available
Available but not activated
Activated but not synchronised
Activated and synchronised,
Synchronised, but DECT overload; attempts were
made at this base station to initiate more than the
permitted simultaneous calls.
Select the location where the export file should be stored using the system
Select the previously exported base station configuration file from your
Click on Delete Confirm with Yes . . .
Click on Import.
Base stations
next to the MAC
27