Gigaset N670 IP PRO Installation, Configuration And Operation page 87

Properties
MAC address MAC address of the base station
RPN Radio Fixed Part Number, identifying the radio-entity
Sync RPN RPN of the other base station the base station is synchronising with
Sync Level Synchronisation level
Statistics
Conn Number of established connections on DECT MAC layer.
For example, through user actions: VoIP calls, accesses to an online phone
book, Internet connections, etc.
Or through system actions: Updating idle displays, date/time synchronisa-
tion, locating handsets for roaming, etc.
Ho setup Number of incoming handovers
Ho release Number of outgoing handovers
Call drops Number of lost connections, i.e. interrupted calls
Async How often the base station has lost on-air DECT synchronisation
Busy How often the maximum number of possible connections of the module
was achieved.
Conn. drops How often the LAN connection to the base station was interrupted
Calls Active calls
Calls-pk Peak number of parallel calls
Sync swaps Number of sync swaps, i.e. , how often the sync master has been changed
due to a sync master crash.
q-idx-lt LAN synchronisation quality
> 90%
> 93%
o-thr-exc PTP offset threshold exceeded counter
If the PTP deviation > 500 ns, the counter is increased. The requirement for
the network is that the PTP deviation is < 500 ns.
d-thr-exc DLS offset threshold exceeded counter
If the DLS deviation > 1000 ns, the counter is increased.
Synchronisation-specific (Sync) and handover-specific values (Ho) are not relevant for single cell
systems.
LAN sync is functional. The remaining 10% evaluate the synchro-
nisation quality.
Good synchronisation quality.
Diagnostics and troubleshooting
87