Gigaset N670 IP PRO Installation, Configuration And Operation page 29

RFPI = PARI + RPN (hex)
(RFPI = Radio Fixed Part Identity) unique name of the base station in a multicell DECT network.
It consists of:
•
PARI (Primary Access Rights Identity): unique system ID of a base station
•
RPN (Radio Fixed Part Number): base station number within the DECT network
The two most significant bits in the RPN represent the RPN group of the DECT manager.
Current firmware version
Firmware version currently installed.
Sync Level
Base station synchronisation level.
The following data can be edited
Name / Location
This name should make it easier to assign the base station within the logical and spatial structure
of the DECT network.
In the text field enter a descriptive name or description for the base station.
Value: max. 32 characters
IP address type
The IP address type is copied from the setting for the DECT manager on the Network – IP/LAN
page ( p. 23). You can change the IP address type. The settings for the DECT manager and the
base stations do not have to match. For example, the DECT manager could receive a fixed IP
address so that it will always be able to access the web configurator with the same address, while
the base stations receive their IP addresses dynamically.
Select the desired IP address type from the option menu.
If the IP address type is Static, you have to enter the IP address.
IP address
Enter an IP address for the base station.
Reduce transmitting power for external antenna operation
Only relevant if the unit has external antennas.
The transmitting power of the external antennas can be reduced. This may be necessary in order
not to violate country-specific emission regulations if the unit is equipped with external
antennas and an external patch antenna (with a gain of 8dB) is used instead of the normal
external sleeve antenna (with a gain of 3dB).
Click on Yes/No to reduce/not reduce the transmitting power.
Base stations
29