Sony clie PEG-SL10 Operating Instructions Manual page 207

Troubleshoot ing – Frequent ly Asked Quest ions
M y CLIÉ handheld appears to freeze w hen I place it near my
computer.
, Move your CLIÉ handheld away from the computer's infrared port.
, Make sure that you turn the Beam Receive function off.
M y CLIÉ handheld displays the message "Waiting for sender"
w hen it is near my computer's infrared port.
, Your computer's infrared port may be set to search automatically for
, Move your CLIÉ handheld away from the computer's infrared port.
, Make sure that you turn the Beam Receive function off.
I cannot cancel a HotSync operation midw ay.
, You may not be able to cancel a job a few seconds after you start a
I cannot backup some data at a HotSync operation.
, Some data is designed not to be backed up by a HotSync operation.
Chapt er 6
Downloaded from:
the presence of other infrared devices. Do the following to turn off
this option:
1
In the Windows task bar, select Start, point to Settings, and select
Control Panel.
2
Double-click Infrared.
3
Click the Options tab.
4
Clear the selection of the option "Search for and provide status for
devices within range."
5
Click Apply and OK.
HotSync operation via a USB connection. Wait for a few seconds and
try again.
Additional information
https://www.usersmanualguide.com/
Continued on next page
207