Sony clie PEG-SL10 Operating Instructions Manual page 117

Advanced Hot Sync
3
4
5
Chapt er 3
Downloaded from:
®
operat ions
Tap t he Ent er phone # f ield.
The Phone Setup dialog box is displayed.
Change t he f ollow ing set t ings if necessary:
1 Enter the telephone number used to access the modem connected to
your computer.
If necessary, enter a dial prefix (such as "9") to access an outside line,
and tap the Dial prefix check box. You can enter a comma in the field
to introduce a "pause" in the dialing sequence. Each comma equals a
two second pause.
2 If the phone line you are using for your CLIÉ handheld has Call
Waiting, select the "Disable call waiting" check box to avoid an
interruption during the modem HotSync operation.
3 If you want to use a calling card to place the call, select the "Use
calling card" check box and enter the calling card number.
Not e
If you plan to connect to your company's dial-in server (network modem) instead
of connecting to a computer modem, see "Conducting a HotSync operation via a
network" on page 120.
Tap OK.
The HotSync screen is displayed again.
Exchanging and updating data using a HotSync
https://www.usersmanualguide.com/
Continued on next page
® operation
117