Sony clie PEG-SL10 Operating Instructions Manual page 205

Troubleshoot ing – Frequent ly Asked Quest ions
HotSync
I cannot perform a HotSync
to make sure I am doing it correctly?
, Check that the operating system of your computer is Windows
, Check the Windows task tray to make sure the HotSync Manager is
, Make sure that the USB cable is connected securely to the computer.
I performed a HotSync operation, but one of my applications
did not synchronize.
, Click the HotSync Manager and choose Custom. Check that the
I am using Outlook
HotSync operation.
, Click the HotSync Manager and choose Custom. Check that the
, Check that the correct conduit is installed. Reinstall the HotSync
, Make sure that Intellisync Lite is installed. See "Step 4: Installing the
I cannot launch the HotSync M anager.
, Make sure that you are not running another program, such as a
, Back-up the Palm Desktop for CLIÉ software, uninstall it, then
, Make sure that Local USB is selected.
Chapt er 6
Downloaded from:
®
operation problems
Second Edition/Me/2000 Professional/XP.
running. If it is not running, open the HotSync Manager from the
Start menu.
correct conduit is active.
®
as my PIM , but I cannot perform a
correct conduit is active.
Manager and make sure the correct conduit is selected.
Palm Desktop for CLIÉ software on your computer" in the Read This
First manual for details.
network or facsimile applications, that uses the serial port you
selected in the Setup dialog box.
reinstall it.
Additional information
https://www.usersmanualguide.com/
®
operation. What should I check
®
98
Continued on next page
205