Genie Filter Membrane Replacement; Tools Required; Replacement Procedure For Genie Filter Membrane - Agilent Technologies 990 User Manual

7 Replacement Procedures

Genie Filter Membrane Replacement

Genie Filter Membrane Replacement

Tools required

The following tools are required to perform the replacement procedure described following
section. Allow approximately 5 to 10 minutes to complete this process.
• Gloves
• Torx T-20 screwdriver
• Tweezers

Replacement procedure for Genie Filter membrane

1 Remove all tubing.
2 Remove the two screws with a T-20 screwdriver.
Wear gloves to prevent contamination of the filter.
NOTE
104 Agilent 990 Micro GC User Manual