Table of Contents
Advertisement
Intel® Server System M50FCP2UR System Integration and Service Guide
2.
Essential System Component Installation and Service
The Intel® Server System M50FCP2UR options are offered with different levels of system integration.
Systems that are not power-on ready are identified as L6 integrated systems. An L6 integrated system
requires essential components (sold separately) to be installed. If your Intel system did not come
preinstalled with any of the following components, then follow the procedures in this chapter:
Processors – 4
th
•
Memory–Up to 32 DDR5 DIMMs
•
Power supply – two required for redundancy
•
If your Intel server system came preinstalled with all listed components, then skip this chapter and go on to
Chapter 3
for installation procedures associated with all other system options and accessories.
Before You Begin
Before integration of any system components, review all the safety and ESD precautions found in the Safety
Warnings section at the beginning of this document.
System Reference
In the following procedures, all references to left, right, front, top, and bottom assume that the reader is
facing the front of the server chassis.
Instruction Format
Each procedure described in this chapter follows an illustration first format. This format gives the reader the
option to follow a quicker path to component integration by first seeing an illustration of the intended
procedure. If necessary, the reader can then follow the step-by-step instructions that accompany each
procedure.
20
Gen Intel® Xeon® Scalable processor family
Figure 2. Required Components for Basic System Operation
Advertisement
Table of Contents
