System Component Quick Reference; System Front View; System Back View; Figure 1. System Front View - Intel R2600SR Series Setup And Service Manual

2.1

System Component Quick Reference

Each Intel ® Server System R2600SR product family system includes four independent, preconfigured
compute nodes to allow for a power-on ready solution with no additional integration. Users interact with the
system from the front, where the compute nodes are located, and the back, where the system fans, power,
and connectivity area are located. This L9 system's modular design allows service personnel to do most
service procedures without having to remove the system chassis from the rack.
System Reference Note: References to left, right, front, top, and bottom assume one faces the chassis front.
2.1.1

System Front View

The Intel® Server System R2600SR product family system's four compute nodes are removable from the
front without power down to allow for high availability operation. The illustration shows the disposition of
the compute nodes in the system as well as other features.
2.1.2

System Back View

The system back view provides access to the connectivity, power, and networking. The connectivity area in
the Intel ® Server System R2600SR product family system includes four Intel® Omni-Path Host Fabric
Interface Adapter Add-in Cards for high-speed interconnection on server clusters installed in the PCIe* add-
in slots, 10GbE ports, two for each compute node in the system, and a dedicated hot-swap System
Management Module (SMM). The system supports two redundant hot-swap power supplies (PSUs). The
illustration shows the location of these features.
10
Intel® Server System R2600SR Setup and Service Guide

Figure 1. System front view