Essential System Component Installation And Service; Internal Cable Routing; Figure 4. Internal Cable Routing - Intel R1000SPO series Service Manual

Server system

Hide thumbs Also See for R1000SPO series:

Table of Contents

Intel

Server System R1000SPO Product Family System Integration and Service Guide

2 Essential System Component Installation and Service

Purpose

This chapter provides instructions for the installation and removal of essential system components including

processors, memory, storage devices, riser cards, and add-in cards.

Before You Begin

Before working with your server product, observe the safety and ESD precautions found in the Warnings

section at the beginning of this document.

Tools and Supplies Needed

Anti-static wrist strap and conductive foam pad (recommended)

•

Phillips* (cross head) screwdriver (#1 and #2 bits)

•

System Reference

All references to left, right, front, top, and bottom assume the reader is facing the front of the chassis.

Instruction Format

Each procedure described in this section will follow an illustration first format. This format will give the

reader the option to follow a quicker path to system integration by first seeing an illustration of the intended

procedure. If necessary, the reader can then follow the step-by-step instructions that will accompany each

procedure.

2.1

All cables should be routed using the cable channels around the Server Board as shown in the following

illustration. When routing cables front-to-back, none should be routed through the center of the system or

in the area between the system fans and the DIMMs slots.

See Appendix B. System Cable Routing Diagrams for additional cable routing details.

Table of Contents