If no improvement occurs, please contact
error.
11.5 Gear indicator does not work
The gear indicator calculates the gear from engine speed and speed. If your gear indicator does not
work, this can have various causes:
•
The sensors RPM, Speed and Gear are incorrectly assigned in the sensor init5.3
•
Under Setup -> Gears5.5
•
The widget itself is created incorrectly -> delete via DSS9
11.6 Yellow bar at the bottom of the data display
If images are missing on a page that are created in the layout of the page but are not stored in the
flash memory, a yellow bar appears in the lower area and indicates the file is not found.
The error can be done by deleting the missing image from the page layout or by adding the missing
image to the flash memory. The process for adding internal DSS images is described in Chapter 9.6
Rev 1.0
info@canchecked.de
Figure 87: yellow bar
with a complete description of the
73