Table of Contents
Advertisement
5.11 Custom Button
The custom button, if activated, can be found at the bottom right of the quick access bar. So far, the
following options are available:
Option
OFF
Sleep
Reset Max
By clicking next to the Custom Button lettering in the setup you can switch through the possible
options.
5.12 Demo Mode
The slide switch for the demo mode activates the demonstration mode of your data display. In this
mode, all sensors created in the TRI/TRX file will oscillate between their minimum and maximum
value. For example, you can use this feature to show your friends how cool your new data display is.
However, this function is particularly interesting when setting up new pages to simulate later
operation and to get an idea of how your freshly created page will look in later use. The demo mode
can also be started directly from the program during setup with the 9.3(chapter 9.3).
5.13 Too Soon Junior
You've worked your way through the setup and come across Too Soon Junior ? Does the sentence
sound familiar to you somewhere? Congratulations, you've found the first Easter Egg. Activate the
slider, close the setup and push your accelerator to the ground.
(The sensor TPS or throttle must be in position number 26 in the TRI/TRX file for this easter egg to
work)
Rev 1.0
Table 2: Custom Button
Description
The custom button is not active and is not displayed
Display turns black and only lights up again with the next touch
Resets the operating maximum values of the sensors
18
Advertisement
Table of Contents
