Table of Contents
Advertisement
9.3.2.3
vertical bar
The vertical bar is a vertical bar chart and can be used wonderfully to display and compare
temperatures or pressures. This is freely configurable in both size and color. A gradient is also
possible.
Figure 31: Display view of the vertical bar widget for comparing three pressures
When it comes to the course of the vertical bar, you can choose from three options:
•
Ascending from bottom to top (bottom2top)
•
Falling from top to bottom (top2bottom)
•
Horizontal line as pointer (bar)
Furthermore, a colour for the lower values and a colour for the upper values can be defined. For
optimal design of the display area, the lower or upper limit of the vertical bar can be set at min value
and max value. If these limits are set to 0, the values of the corresponding sensor from the TRI/TRX
file are used.
In the previous example, the sensor was assigned to OilT. Thus, the vertical bar is blue first and then
turns red with increasing oil temperature.
If the check mark is set at show name, the name of the assigned sensor is displayed in the lower area
of the vertical bar.
Rev 1.0
Figure 32: Configuration vertical bar
39
Advertisement
Table of Contents
