Table of Contents
Advertisement
9.3.2.21 picture
In addition to the text fields, you can also use the picture widget to make your pages more appealing
or provide a custom background. In the figure below, the CANchecked logo and the carbon
background are created as a picture widget.
Figure 64: Carbon background and CANchecked logo as picture widget
The position of the image can be defined as usual with x/y coord. The points x/y size do not
determine the size of the image, but only the image section in the preview. The size of the image is
determined by the size when uploaded. The screen measures 320x240 pixels. The recommended
size for icons is 30x30 pixels, for smaller logos 100x40 pixels is recommended. If the desired image
has been scaled appropriately and uploaded via the upload section and then be selected from the
drop-down list in the picture widget.
Figure 65: Configuration picture
The blend colour function can be used to specify the colour with which the image should be mixed.
The strength of the mixture is configured via alpha blend, where the value 0 does not correspond to
any mixture. With ignore colour you can determine which color becomes transparent within the
image. This function can be used to crop logos.
9.3.2.22 RPM bar
The speed bar is already known from the Gen1. Of course, you can also assign other sensors to it. An
illustration of the speed bar is visible below. Here, the sensor speed is assigned to the widget.
Rev 1.0
59
Advertisement
Table of Contents
