Table of Contents
Advertisement
9.3.2.13 horizontal bar
The horizontal bar is analogous to the vertical bar. The horizontal bar chart can also be used to
display and compare temperatures or pressures. This is freely configurable in both size and color. A
gradient is also possible. In the figure below, the widget is used to display the opening angle of the
throttle.
With the horizontal bar, you can choose from three options:
•
From left to right
•
From right to left
•
Vertical line as pointer
Furthermore, a color for the lower values and a color for the upper values can be defined. For
optimal design of the display area, the lower or upper limit of the horizontal bar can be set at min
value and max value. If these limits are set to 0, the values of the corresponding sensor from the
TRI/TRX file are used.
In the previous example, the sensor was mapped to TPS. Thus, the horizontal bar is first green and
then turns red with increasing throttle position.
At show name, the name of the assigned sensor can be displayed in the lower area of the horizontal
bar.
Rev 1.0
Figure 51: horizontal bar
Figure 52: Configuration horizontal bar
50
Advertisement
Table of Contents
