Flushing Pad Replacement - Roland TrueVis AP-640 User Manual

Flushing Pad Replacement

The flushing pad is used when the print heads spray ink in the home position.
When it is time to replace the flushing pad, the message [The time for flushing pad replacement has ar-
rived.] appears. In this situation, replace the flushing pad.
For information about purchasing flushing pads, contact your authorized dealer or visit our website
(http://www.rolanddg.com/).
WARNING
Be sure to perform operations as specified by the instructions, and never touch any area not
specified in the instructions.
Sudden movement of the machine may cause injury.
Required items
Flushing pad
(optimizer ink section, color ink section: 1
each)
IMPORTANT
• Always use separate cleaning sticks and cleaning liquid with the optimizer ink and color ink sections. If the optimizer
ink and color ink mix, the ink may harden and cause discharge issues.
• Use a new cleaning liquid bottle for maintenance.
MEMO
If the inside of the printer is dirty, refer to
Procedure
1.
When the message [The time for flushing pad replacement has arrived.] appears, tap [OK].
2.
Remove any media.
3.
Tap to display the messages.
4.
Tap [The time for flushing pad replacement has arrived.].
Cleaning stick (2)
Cleaning the Machine(P. 160)
Replacing Parts for Maintenance
Cleaning liquid bottle for maintenance
and perform cleaning.
Replacing Consumable Parts
195