Messages On The Operation Panel - Roland TrueVis AP-640 User Manual

Messages on the Operation
Panel
Messages ............................................................................................... 226
[When output, cleaning, and other operations are completed, discard the
discharged fluid.] ....................................................................... 226
[The time for manual cleaning has arrived.] ............................................ 226
[The time for wiper replacement has arrived.]......................................... 226
[The time for flushing pad replacement has arrived.]................................. 226
[Print head protection mode has activated.]............................................ 226
[Fill the cleaning liquid tank with cleaning liquid.] .................................... 227
[Operation of the take-up unit stopped.] ................................................ 227
[Install the media clamps correctly.] ...................................................... 227
[Media clamps could not be detected.] ................................................... 227
[The LAN cable is not connected.] ........................................................ 228
[Connection is requiring too much time. Manually setting the IP address
will improve the connection speed.] ............................................... 228
[There is ink that has expired.] ............................................................ 228
[The temperature around the machine is too low. Adjust the room tem-
perature.] ................................................................................ 228
[The temperature around the machine is too high. Adjust the room tem-
perature.] ................................................................................ 228
Error Messages ........................................................................................ 229
[Ink Pouch Tray Error] ........................................................................ 229
[Cover Open Error]............................................................................ 229
[Media End Error] ............................................................................. 229
[Pinch Lever Error] ........................................................................... 230
[Media Loading Error] ........................................................................ 230
[Loose Media Error] ........................................................................... 231
[Drain Bottle Error] ........................................................................... 231
[Unable to Fill Wiper Cleaning Liquid] .................................................... 231
[Print Head Height Mismatch] .............................................................. 231
[Insufficient Media Width] ................................................................... 232
[Ink Supply Error] ............................................................................. 232
[Temperature Increase Timeout Error] ................................................... 232
[Motor Error] ................................................................................... 232
[Print Head Dry-out Error] .................................................................. 233
[Low Temperature Error] .................................................................... 233
[High Temperature Error].................................................................... 233
[Take-up Unit Communication Error]...................................................... 233
[Dryer Error] ................................................................................... 234
[Service Call] ................................................................................... 234
[Software error] ............................................................................... 234

Messages on the Operation Panel

225