Preface; About This Guide - Bay Networks 5393 Hardware Installation Manual

About this Guide

T
his guide describes how to install a Remote Annex 5393/PRI in
a Bay Networks Lattice System 5000 Hub.
Refer to the Remote Annex Software Installation Notes that come with
your Remote Annex 5393/PRI for a description of the software
installation. Refer to the Remote Annex Administrator's Guide for
UNIX for configuration information.
This guide includes the following chapters and appendices:
Chapter 1 Introduction
Contains an overview of the Remote Annex
5393/PRI, and describes the hardware features
and firmware functions.
Chapter 2 Installing the Remote Annex 5393/PRI
Describes how to install the Remote Annex
5393/PRI in a System 5000 Hub and how to
confirm its operating status.
Chapter 3 ROM Monitor Commands
Describes the ROM Monitor commands that
modify specific configuration parameters,
perform diagnostic tests, and load the
operational code.
Chapter 4 Troubleshooting Procedures
Provides troubleshooting and verification
procedures.
Remote Annex 5393/PRI Hardware Installation Guide

Preface

xvii