Appendix B
Modem Module Installation Instructions
Main Logic Module Removal Instructions
B-2
Remote Annex 5393/PRI Hardware Installation Guide
The following instructions describe how to remove the Remote Annex
5393/PRI from the System 5000 Hub. These instructions assume that
you have taken the necessary steps.
instructions.
1
Disconnect the PRI ISDN cable.
2
Loosen the captive screws.
3
Disengage the module from the backplane by simultaneously
pushing the inserter/extractor levers towards the outside of the
module front panel (see
4
Remove the module.
Figure B-1. Removing the Main Logic Module from the System 5000 Hub
Figure B-1
illustrates the
Figure
B-1).