Preface; About This Guide - Bay Networks Remote Annex 4000 Hardware Installation Manual

About this Guide

T
his guide describes how to install a Remote Annex 4000 Series on
a local area network (LAN).
See the software installation notes that come with your Remote Annex
4000 for a description of the software installation. See the Remote
Annex Administrator's Guide for UNIX for configuration information.
This guide includes the following chapters and appendices:
Chapter 1 Introduction
This chapter contains an overview of the Remote
Annex 4000; it describes the hardware features and
firmware functions.
Chapter 2 Installing the Remote Annex 4000
This chapter contains a description of how to install
the Remote Annex 4000 on a LAN, and how to
confirm its operating status.
Chapter 3 ROM Monitor Commands
This chapter contains a description of the ROM
Monitor commands that modify specific
configuration parameters, perform diagnostic tests,
and load the operational code.
Chapter 4 Troubleshooting Procedures
This chapter provides troubleshooting and
verification procedures.
Remote Annex 4000 Hardware Installation Guide

Preface

xiii