Gbic Physical Specifications; 1000Base-T Gbic Specifications; Table 2; Specifications - Nortel Passport 8600 Installation Manual

50 GBIC specifications
Figure 1
GBIC label
GBIC physical specifications
The following table describes general GBIC specifications. GBIC ports
for both multimode (MMF) and single mode fiber (SMF) have SC-type
connectors and a minimum cable distance of 2 meters (m).

Table 2

GBIC physical specifications
Parameter
Dimensions (H x W x D)
Connectors
1000BASE-T GBIC specifications
The 1000BASE-T GBIC provides Gigabit Ethernet connectivity using a
single eight-pin RJ-45 connector. The 1000BASE-T GBIC operates at 1
gigabit per second (Gbit/s) and does not support 100BASE-T or 10BASE-T
interfaces.
The part number of this GBIC is AA1419041-E5 for the Ethernet Routing
Switch and the Metro Ethernet Routing Switch.
Copyright © 2007, Nortel Networks
.
Nortel Metro Ethernet Routing Switch 8600
Installation — SFP, XFP, and GBIC Hardware Components
NN46220-301 02.02 Standard
4.2 13 November 2007
Specifications
0.39 x 1.2 x 2.6 inches (in.)
1.0 x 3.0 x 6.5 centimeters (cm)
• Multimode: SC
• Single mode: SC
• CAT5 RJ-45