Gbic Physical Specifications; 1000Base-T Gbic Specifications - Nortel Passport 8600 Installation Manual

62 GBIC specifications
Figure 10
GBIC label
GBIC physical specifications
The following table describes general GBIC specifications. GBIC ports
for both multimode (MMF) and single mode fiber (SMF) have SC-type
connectors and a minimum cable distance of 2 meters (m).
Table 3
GBIC physical specifications
Parameter
Dimensions (H x W x D)
Connectors
1000BASE-T GBIC specifications
The 1000BASE-T GBIC provides Gigabit Ethernet connectivity using a
single eight-pin RJ-45 connector. The 1000BASE-T GBIC operates at 1
gigabit per second (Gbit/s) and does not support 100BASE-T or 10BASE-T
interfaces.
The part number of this GBIC is AA1419041-E5 for the Ethernet Routing
Switch and the Metro Ethernet Routing Switch.
Installation — SFP, XFP, GBIC, and OADM Hardware Components
Copyright © 2007, Nortel Networks
.
Specifications
0.39 x 1.2 x 2.6 inches (in.)
1.0 x 3.0 x 6.5 centimeters (cm)
• Multimode: SC
• Single mode: SC
• CAT5 RJ-45
Nortel Ethernet Routing Switch 8600
NN46205-305 01.02 Standard
4.1 16 November 2007