Nortel Passport 8600 Installation Manual page 22

22 Small form factor pluggable transceivers
Any DDM SFP can be used in any Metro Ethernet Services Unit 1800 or
1850 device or Metro Ethernet Routing Switch 8600 module that supports
SFPs. The optical functions of the SFP are supported. Access to the DDI
information is only provided for:
•
•
Access to DDI information is not supported for:
•
•
The SFPs described in this section are all RoHS -E6 compliant.
For information about configuring DDM, see Nortel Metro Ethernet Routing
Switch 8600 Troubleshooting (NN46220-701).
The following table lists and describes the Nortel SFP models with DDI
capability. All the optical SFPs use LC connectors.
SFP models with DDI capability
Model number and connector
1000BASE-T (RJ-45)
1000BASE-SX
1000BASE-LX
1000BASE-XD
1000BASE-XD
1000BASE-ZX
1000BASE-XD CWDM
1000BASE-ZX CWDM
1000BASE-BX
1000BASE-EX
For specifications for these SFPs, see
Copyright © 2007, Nortel Networks
.
Metro ESU 1850
Metro Ethernet Routing Switch 8600 modules 8630 and 8683
Metro ESU 1800
Metro Ethernet Routing Switch 8600 module 8668
Product number
AA1419043-E6
AA1419048-E6
AA1419049-E6
AA1419050-E6
AA1419051-E6
AA1419052-E6
AA1419053-E6 to
AA1419060-E6
AA1419061-E6 to
AA1419068-E6
AA1419069-E6,
AA1419070-E6
AA1419071-E6
Nortel Metro Ethernet Routing Switch 8600
Installation - SFP, XFP, and GBIC Hardware Components
NN46220-301 02.02 Standard
4.2 13 November 2007
Description
CAT5 UTP, up to 100 m. Note that
because the 1000BASE-T device is
all electrical, there is no need for DDI
support.
850 nm, up to 275 or 550 m
1310 nm, up to 10 km
1310 nm, up to 40 km
1550 nm, up to 40 km
1550 nm, up to 70 km
1470 nm to 1610 nm, up to 40 km
1470 nm to 1610 nm, up to 70 km
Bidirectional 1310 nm and 1490 nm, up
to 10 km
1550 nm, up to 120 km
"SFP specifications" (page 37).