The following figure shows the 1000BASE-SX MT-RJ SFP. Push the tab
to release the device.
1000BASE-SX MT-RJ SFP extraction mechanism
The following figure shows the wrap-around latch-type extraction
mechanism. To remove the device, push the collar towards the module.
Wrap-around latch-type extraction mechanism
Removing an SFP
Remove an SFP to replace it or to commission it elsewhere.
Procedure steps
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Action
Disconnect the network fiber cable from the SFP connector.
Affix dust covers over the fiber optic bore and connector.
Depending on your SFP model, to release the SFP, press the
locking/extractor mechanism.
Nortel Metro Ethernet Routing Switch 8600
Installation — SFP, XFP, and GBIC Hardware Components
NN46220-301 02.02 Standard
4.2 13 November 2007
Removing an SFP 25