10Gbase-Er/Ew Xfp Specifications - Nortel Passport 8600 Installation Manual

Parameter
RIN OMA (maximum)
12
Maximum optical return loss tolerance
Maximum transmitter reflectance
Receiver characteristics
Line rate (nominal)
Average receive power for BER 10
Maximum average receive power for damage
Maximum receiver sensitivity in OMA
Maximum receiver reflectance
Stressed receiver sensitivity in OMA
Receiver electrical 3 dB upper cutoff frequency
Examples of an OFF transmitter are: no power supplied to the PDM, laser
shutdown for safety conditions, activation of a PMD_global_transmit_disable
or other optional transmitter shut down condition
10GBASE-ER/EW XFP specifications
The following table lists the transmitter specifications for the
10GBASE-ER/EW XFP. The reach for this XFP is up to 40 km at a
wavelength of 1550 nm. The part number of this XFP is AA1403003-E5.
For more information about the 10GBASE-EX XFP, including test and
measurement information and more specifications, see the IEEE 802.3ae
standard.
You can configure the XFP to operate in either LAN (Ethernet) or WAN (SONET)
mode, depending on the module (8683XLR is a LAN-only module, and 8683XZR
is a LAN/ WAN module). Model numbers ending in R denote a LAN interface;
model numbers ending in W denote a WAN interface.
Table 14
IEEE 802.3ae 10GBASE-ER/EW XFP specifications
Parameter
Line rate (nominal)
MTBF
Center wavelength range
Copyright © 2007, Nortel Networks
.
-12
Nortel Metro Ethernet Routing Switch 8600
Installation — SFP, XFP, and GBIC Hardware Components
NN46220-301 02.02 Standard
4.2 13 November 2007
10GBASE-ER/EW XFP specifications 63
Specifications
-128 dB/Hz
-12 dB
-12 dB
10GBASE-LR 10.3125 Gbit/s ± 100 ppm
10GBASE-LW 9.95328 Gbit/s ± 100 ppm
-14.4 dBm to 0.5 dBm
1.5 dBm
-12.6 dBm
-12 dB
-10.3 dBm
12.3 GHz
ATTENTION
Specifications
10GBASE-ER 10.3125 Gbit/s ±100 ppm
10GBASE-EW 9.95328 Gbit/s ±20 ppm
675 000 hours
1530 to 1565 nm; nominal 1550 nm