26 Small form factor pluggable transceivers
The following figure shows the 1000BASE-SX MT-RJ SFP. Push the tab
to release the device.
Figure 2
1000BASE-SX MT-RJ SFP extraction mechanism
The following figure shows the wrap-around latch-type extraction
mechanism. To remove the device, push the collar towards the module.
Figure 3
Wrap-around latch-type extraction mechanism
Removing an SFP
Remove an SFP to replace it or to commission it elsewhere.
Procedure steps
Step
1
2
Installation — SFP, XFP, GBIC, and OADM Hardware Components
Copyright © 2007, Nortel Networks
.
Action
Disconnect the network fiber cable from the SFP connector.
Affix dust covers over the fiber optic bore and connector.
Nortel Ethernet Routing Switch 8600
NN46205-305 01.02 Standard
4.1 16 November 2007