Call Statistics; Table B-36. Active Call Statistics - Nortel 5399 User Manual

Chapter 2 Simple Network Management Protocol (SNMP)
Model 5399 Remote Access Concentrator Network Administrator's Guide for UNIX
A-92

Call Statistics

The 5399 RAC maintains call statistics for active calls and call history
statistics for previous calls. The following sections describes the statistics
in more detail.
Active Call Statistics
Active call statistics are available through CLI and SNMP. The MIB
object names and descriptions for active call statistics are listed in
Table B-36.

Table B-36. Active Call Statistics

MIB Object Name
actcallUsername
actcallCallingNumber
actcallCalledNumber
actcallSPBName
actcallDeviceType
(continued on next page)
Description
Name of user associated with this call. If
the user name cannot be determined, the
string 'unknown' is returned.
The telephone number that initiated the
call. If the call is active but the user name
cannot be determine at the time of the call,
the 'unknown' string is returned.
The number to which call is made. If the
call is active and the number cannot be
determined, the 'unknown' string is
returned.
Session Parameter Block (SPB) name - The
RAC determines how to handle a call
through the SPB. When the calls are
received, the RAC tries to match the
received SETUP information with the
values in the criteria section of the defined
SPBs.
Indicates the port device type.
1=async 2=sync 3=ta 4=detecting
Book A