Chapter 1
Network Administration
Controlling WAN Calls Made to the 5399 RAC
Model 5399 Remote Access Concentrator Network Administrator's Guide for UNIX
A-6
The superuser CLI wan call command controls whether calls are accepted
or denied by the 5399 RAC.
The command has two options:
•
Allow which accepts calls made to the 5399 RAC.
•
Stop which denies new calls, but lets current calls continue.
By default, the 5399 accepts calls. The 5399 reverts to this default
following a restart.
These options must be used with one of the following keywords:
•
Incoming for calls made to the 5399 RAC
•
Outgoing for calls made from the 5399 RAC
The 5399 RAC does not currently support outgoing calls. However,
the command does display outgoing call information.
wan call Command Syntax
To perform this task...
Learn current status of call
acceptance/denial
Allow incoming calls
Allow outgoing calls
Stop acceptance of new
incoming calls
Stop acceptance of new
outgoing calls
Issue this command
wan call
wan call allow incoming
wan call allow outgoing
wan call stop incoming
wan call stop outgoing
Book A