Nortel 5399 User Manual page 113

Book A
Model 5399 Remote Access Concentrator Network Administrator's Guide for UNIX
Table B-44. Alarm Traps (continued)
MIB Object Name
callInactivityTrap
modemErrorTrap
wanAlarmTrap
wanAlarmClearTrap
wanBpvThreshTrap
(continued on next page)
Chapter 2 Simple Network Management Protocol (SNMP)
Description
This trap is generated when a call is
disconnected due to inactivity. The RAC
has the following activity timers that trigger
this trap:
cliInactivityTimeout - The amount of time
(in minutes) that the RAC waits before
hanging up the call.
inactivityTimeout - The amount of time (in
minutes) the RAC waits before terminating
the call. Uses the value of
gpTimerInactivityTimer.
netActivityTimeout - Similar to the activity
timeout.
This trap is sent to the trap host(s) when a
modem failure is automatically detected,
the modem is busied out due to a percentage
failure threshold over a time period or a
consecutive failure threshold.
This trap is generated when a Red, Yellow,
or Blue alarm is detected.
This trap is generated when at least 15
seconds have elapsed without a Red,
Yellow, or Blue alarm.
This trap is generated when the number of
bipolar violation errors in a 15 minute
interval equals or exceeds the threshold
defined by wanBpvThreshold.
A-109