Nortel 5399 User Manual page 92

Chapter 2 Simple Network Management Protocol (SNMP)
Model 5399 Remote Access Concentrator Network Administrator's Guide for UNIX
A-88
Table B-35. Modem Statistic Objects (continued)
MIB Object Name
mdmCtlForceRetrain
mdmIdTable
mdmIdEntry
mdmIdHardwareRev
mdmIdSoftwareRev
mdmStatState
mdmNumber
mdmStatTotalCalls
mdmStatBeginRxSpeed
mdmStatCurrRxSpeed
mdmStatBeginTxSpeed
mdmStatCurrTxSpeed
(continued on next page)
Description
This command forces the modem to retrain.
In response to a get-request or
get-next-request, the agent always returns
'ready (1)' as the value. Setting the value to
execute (2) forces the modem to retrain.
A table of modem identification objects per
modem.
A row in the modem identification table.
Modem hardware version.
Modem software version.
This command is used to put a modem into
service (busied out) or put an available
modem out of service.
Unique number identifying each modem.
Number of calls handled by this modem.
Resets to zero after the system is rebooted.
Receive connect speed at the time the call
was established (speed is dependent on
communication standard and line quality).
Current receive connect speed (dependent
on communication standard and line
quality).
Transmit connect speed at the time the call
was established (speed dependent on
communication standard and line quality).
The current transmit speed (dependent on
communication standard and line quality).
Book A