Nortel 5399 User Manual page 44

Chapter 1 Network Administration Book A
The superuser stats –c command clears all serial line statistics to zero.
The stats –m command displays statistics for active control lines, but
displays the modem controls for inactive control lines rather than
displaying idle.
The stats –m < >command displays statistics for
number_range
asynchronous ports in specified number range. For example, specifying
a range of 1 through 8 (stats -sta1-8) displays statistics for the first eight
synchronous (asy) ports.
The stats –sta< > displays statistics for terminal adapter (ta)
number_range
ports in the specified number range. For example, specifying a range of
1 through 8 (stats -sta1-8) displays statistics for the first eight terminal
adapter (ta) ports.
The stats –ssyn< > displays statistics for synchronous (syn)
number_range
ports in the number range. For example, specifying a range of 1 through
4 (stats -ssyn1-4) displays statistics for the first four synchronous ports.
Model 5399 Remote Access Concentrator Network Administrator's Guide for UNIX
A-40