Multiple Ways To Fly The X12Te-Grid - Electro-Voice X-LINE ADVANCE Series Installation Manual

66 en | Flying the system
9.3.2

Multiple ways to fly the X12TE-GRID

X12TE-GRID can be flown in four different ways—with a single grid pick point, with a single
grid pick point plus a pullback to the venue, with two grid pick points, and with two grid pick
points plus a pull-up to the grid. Additionally, the loudspeakers may be attached to the grid in
three different positions. In line array configuration software from Electro-Voice, the user must
choose which way the grid will be flown, plus the attachment position of the loudspeakers.
2a. X12 TE GRID - with 2b. X12 TE GRID
Loudspeaker in A Loudspeaker in B
Position Position
2g. X12 TE GRID - with
2h. X12 TE GRID
Loudspeaker in A
Loudspeaker in B
Position
Position
Figure 9.9: Flying the X12TE-GRID
Single grid pick point:
With the loudspeakers attached in the A position (2a), a large section of the grid extends
behind the rear of the loudspeaker, enabling the maximum amount of down tilt.
With the loudspeakers attached in the B position (2b), a portion of the grid extends both
behind and in front of the loudspeaker, enabling moderate tilt both up and down.
With the loudspeakers attached in the C position (2c), a large section of the grid extends in
front of the loudspeaker, enabling the maximum amount of up tilt.
Choose the pick point on the grid to achieve the desired angle as reported by Electro-Voice
line array configuration software.
Single grid pick point with a pullback to the venue:
A pullback to the venue should be used when more down tilt is required than can be achieved
by a single grid pick alone. The X12PU-BGK is used at the bottom of the array.
The most common orientation would be to use the grid with the loudspeakers attached in the
A position (2d).
2019-07 | 04 | F.01U.310.953
- with 2c. X12 TE GRID - with
Loudpseaker in C
Position
2i. X12 TE GRID - with
- with
Loudpseaker in C
Position
2d. X12 TE GRID - with 2e. X12 TE GRID
Loudspeaker in A Loudspeaker in B
Position, with Position, with
Pullback to Venue Pullback to Venue
2j. X12 TE GRID - with 2k. X12 TE GRID
Loudspeaker in A Loudspeaker in B
Position, with Pullup Position, with Pullup
to Grid to Grid
Installation manual
X-LINE ADVANCE System Rigging & Transport
- with 2f. X12 TE GRID - with
Loudpseaker in C
Position, with
Pullback to Venue
- with 2l. X12 TE GRID - with
Loudpseaker in C
Position, with Pullup
to Grid
Electro-Voice