X12-125F-Dolly Top Cover - Electro-Voice X-LINE ADVANCE Series Installation Manual

26 en | Transportation dollies
3.
7.1.2

X12-125F-DOLLY top cover

Notice!
i
The dolly top cover comes with the dolly top cover rear link bars in the retracted (storage)
position.
This position enables X12-125F dollies to be stacked flat for storage.
Preparing the top cover for installation
To prepare the top cover for installation, do the following:
1.
2.
3.
4.
5.
Reverse the process to return to the storage position.
2019-07 | 04 | F.01U.310.953
Ensure both dolly side panels are squared and inside all side panel guides.
Release the four captive twist-lock pins in the top cover link bars.
All four captive twist-lock pins should now be in the closed position. Ensure the top dolly
cover is secure.
On each side, pull the pin securing the rear link bar in the retracted (storage) position.
Slide the link bar to the rear.
Rotate the link bar ¼ turn to the rear.
Slide the link bar as far forward as it will go
Insert the attached pin in the forward pin hole to secure the link bar in the extended
positon.
Installation manual
X-LINE ADVANCE System Rigging & Transport
Electro-Voice