X-LINE ADVANCE System Rigging & Transport
8
Ground stacking
Warning!
Ensure the dolly base is level and there is contact to the ground or floor at all four corners.
!
The points of contact must be on a hard surface capable of supporting the weight.
A ground-stacked array that is not solidly supported may topple over, causing property
damage or personal injury.
Warning!
Do not climb on the array. The combined weight of the array plus a person may shift the
!
center of gravity of the array enough to cause it to topple over.
A ground stacked array that is not level and evenly supported may topple over, causing
property damage, personal injury or death.
8.1
Ground stacking X1/X2 loudspeakers
The dolly top is designed to be used as a ground-stacking kit. Maximum recommended ground
stack height is six elements.
Figure 8.1: X1 or X2 ground stacking on a dolly top (A)
8.2
Ground stacking subwoofers
X-Line Advance subwoofers are designed for multiple configurations. They may be used as a
forward facing standard array or as a cardioid array. On the input panel, you have a choice to
connect the subwoofer in either parallel (4 ohm) or dual (8 ohm) mode for optimum
subwoofer array control.
Electro-Voice
A
Installation manual
Ground stacking | en
33
2019-07 | 04 | F.01U.310.953