Table of Contents
Advertisement
X-LINE ADVANCE System Rigging & Transport
Installing the dolly top cover
To install the dolly top cover, do the following:
1.
2.
3.
4.
5.
7.2
X12-125F-DOLLY accessories
7.2.1
Installing the X12-125F-DAK dolly adapter kit onto the top cover of the
X12-125F-DOLLY
Figure 7.2: X12-125F-DAK Dolly Adapter Kit
Tools needed:
–
–
–
Ensure all of the parts in this X12-125F-DAK dolly adapter kit are present and accounted for.
Electro-Voice
Pull and twist open the four captive twist lock pins on the top subwoofer.-
Verify the dolly top cover rear link bars are in the extended position.
Align the dolly top cover with the top subwoofer.
The short bars align with the grille side of the top subwoofer. The long bars align with the
input panel side of the top subwoofer.
Guide the extended link bars of the dolly top cover into the V-blocks of the top
subwoofer.
Twist and engage the four captive twist lock pins.
All four captive twist lock pins are in the closed position. Ensure the dolly top cover is
secure.
One 5/32" Hex (Allen) key
One 9/16" wrench
One 9/16" deep well socket wrench
Installation manual
Transportation dollies | en
2019-07 | 04 | F.01U.310.953
27
Advertisement
Table of Contents
