Ground Stacking A Mixed Array - Electro-Voice X-LINE ADVANCE Series Installation Manual

38 en | Ground stacking
To install the X12-125F-CGK Cardioid Grille Kit, do the following:
1.
2.
3.
Notice!
i
If desired, apply a drop of non-permanent thread locker to the screw threads to prevent
loosening from vibration.
8.3

Ground stacking a mixed array

Caution!
We recommend that two or more persons lift and place heavier loudspeakers. Single person
!
lift and placement of heavier loudspeakers could cause injury.
2019-07 | 04 | F.01U.310.953
Position the cardioid grille kit on the rear rigging extrusions.
Ensure the screw holes are aligned top to bottom and side to side.
Insert the screws (provided) into the screw holes.
Tighten the screws.
Ensure the Cardioid Grille Kit is attached securely to the rear of the X12-125F subwoofer.
Installation manual
X-LINE ADVANCE System Rigging & Transport
Electro-Voice