Table of Contents
Advertisement
X-LINE ADVANCE System Rigging & Transport
1
Safety
This document details general rigging practices appropriate to the entertainment industry, as
they would apply to the rigging and rigging ready products of X-Line Advance product family
from Electro-Voice. It is intended to familiarize the user with standard rigging hardware and
techniques for suspending X-Line Advance loudspeaker systems overhead. Only persons with
the knowledge of proper hardware and safe rigging techniques should attempt to suspend any
sound systems overhead. Prior to suspending any X-Line Advance loudspeaker systems
overhead, it is essential the user is familiar with the strength ratings, rigging techniques and
special safety considerations outlined in this manual. The rigging techniques and practices
recommended in this manual are, of necessity, in general terms to accommodate the many
variations in loudspeaker arrays and rigging configurations. As such, the user is expressly
responsible for the safety of all specific X-Line Advance loudspeaker array designs and rigging
configurations as implemented in practice.
All the general rigging material contained in this manual is based on the best available
engineering information concerning materials and practices, as commonly recognized in the
United States, and is believed to be accurate at the time of original printing. As such, the
information may not be directly applicable in other countries. Furthermore, the regulations
and requirements governing rigging hardware and practices may be superseded by local
regulations. It is the responsibility of the user to make sure any Electro-Voice loudspeaker
system is suspended overhead in accordance with all current federal, state, and local
regulations.
All specific material concerning the strength ratings, rigging techniques, and safety
considerations for the X-Line Advance loudspeaker systems is based on the best available
engineering information concerning the use and limitations of the products. Electro-Voice
continually engages in testing, research and development of its loudspeaker products. As a
result, the specifications are subject to change without notice. It is the responsibility of the
user to make sure that any Electro-Voice loudspeaker system is suspended overhead in
accordance with the strength ratings, rigging techniques, and safety considerations given in
this document and any manual update notices. Visit our website:
current product technical documentation or software. All non-Electro-Voice associated
hardware items necessary to rig a partial and/or a complete X-Line Advance loudspeaker array
(chain hoists, building or tower supports, and miscellaneous mechanical components) are the
responsibility of others.
Electro-Voice
April 2019
Electro-Voice
Installation manual
Safety | en
www.electrovoice.com
2019-07 | 04 | F.01U.310.953
5
for
Advertisement
Table of Contents
