Operating characteristics of the analysis probe
The following operating characteristics are not specifications, but are typical
operating characteristics for the analysis probe.
Operating Characteristics
Intel MCS-96 microcontrollers, and all microprocessors made by other
Microprocessor
manufacturers that comply with Intel MCS-96 specifications. The
Compatibility
MCS-96 family of microcontrollers includes 8096, 8097, AH versions,
-90 versions, BH versions, and 80C196KA/KB/KC/KD.
68-pin PLCC
Microprocessor
PLCC microprocessors must be socketed
Package
None.
Accessories
Required
HP 1660A/AS/C/CS/CP, HP 1661A/AS/C/CS/CP,
Logic Analyzer
HP 1662A/AS/C/CS/CP, HP 1670A/D, HP 1671A/D,
Required
HP 1672A/D, HP 16550A (one card), HP 16554A/55A/56A (one card),
HP 16555D/56D (one card), HP 16600A, HP 16601A, HP 16602A,
HP 16603A.
Four pods are required for inverse assembly. Up to three pods
Probes Required
required for timing analysis.
1 A at +5 Vdc maximum from the logic analyzer.
Power Requirements
CAT I, Pollution degree 2.
24 pF for RD#, WRL#/WR#, and WRH#/BHE#. All other signals are
Signal Line Loading
loaded with 16 pF.
Byte read/write
Microprocessor
Byte instruction fetch
Operations
Illegal opcodes
Displayed
Word read/write
Word instruction fetch
Prefetch
20 MHz clock input.
Maximum Clock
Speed
HP E2416B 80196 Analysis Probe
Operating characteristics of the analysis probe
Reference
4-3