Table of Contents
Advertisement
If You Have a Problem
Overview
Chapter 1
Connecting &
Occasionally, a measurement may not give the expected results. If
Configuring
you encounter difficulties while making measurements, use this
Your System
Chapter 2
chapter to guide you through some possible solutions. Each heading
Connecting
lists a problem you may encounter, along with some possible
the Analysis
Probe to the
solutions.
Target System
The information in this chapter is presented in the following sections:
Connecting
the Analysis
•
Probe to the
Logic analyzer problems
Logic Analyzer
•
Analysis probe problems
•
Configuring
Inverse assembler problems
•
Connecting
Intermodule measurement problems
Optional
•
Equipment
Messages
•
Cleaning the instrument
Analyzing the
If you still have difficulty after trying the suggestions in this chapter,
Target System
Chapter 3
contact your local Hewlett-Packard Service Center.
Reference
Chapter 4
If You Have
a Problem
Chapter 5
When you are working with the analyzer, be sure to power down both the
C A U T I O N
analyzer and the target system before disconnecting or connecting cables,
probes, and analysis probes. Otherwise, you may damage circuitry in the
analyzer, analysis probe, or target system.
5–2
HP E2416B 80196 Analysis Probe
Advertisement
Table of Contents
