HP E2416B User Manual page 18

Connecting and Configuring Your System
This chapter shows you how to connect the logic analyzer to the
target system through the analysis probe.
If you are connecting to an HP 16600 or HP 16700 series logic
analysis system, follow the instructions given on screen in the Setup
Overview
Chapter 1
Assistant for connecting and configuring your system. Use this
manual for additional information, if desired. Refer to chapter 1 for a
Connecting &
description of Setup Assistant.
Configuring
Your System
If you are not using the Setup Assistant, follow the instructions given
Chapter 2
in this chapter. This chapter is divided into the following sections;
Connecting
the Analysis
the order shown here is the recommended order for performing these
Probe to the
tasks:
Target System
•
Connecting
Read the power on/power off sequence
the Analysis
•
Probe to the
Connect the analysis probe to the target system
Logic Analyzer
•
Connect the analysis probe to the logic analyzer
Configuring
•
Configure the analysis probe
•
Connecting
Configure the logic analyzer
Optional
•
Equipment
Connect optional equipment
Analyzing the
Target System
Chapter 3
Reference
Chapter 4
If You Have
a Problem
Chapter 5
2–2 HP E2416B 80196 Analysis Probe