HP E2416B User Manual page 7

Using the Inverse Assemblers 3-9
To display captured state data 3-10
To align the inverse assembler 3-11
Inverse assembler output format 3-12
Inverse assembler error messages 3-12
4 Reference
Operating characteristics of the analysis probe 4-3
Theory of operation and clocking 4-5
State-per-transfer mode 4-5
State-per-clock mode 4-5
Timing mode 4-6
Signal-to-connector mapping 4-8
Circuit board dimensions 4-13
Replaceable parts 4-14
5 If You Have a Problem
Analyzer Problems 5-3
Intermittent data errors 5-3
Unwanted triggers 5-3
No activity on activity indicators 5-4
No trace list display 5-4
Analyzer won't power up 5-4
Analysis Probe Problems 5-5
Target system will not boot up 5-5
Erratic trace measurements 5-6
Capacitive loading 5-6
Inverse Assembler Problems 5-7
No inverse assembly or incorrect inverse assembly 5-7
Inverse assembler will not load or run 5-8
Intermodule Measurement Problems 5-9
Contents
Contents-3