Table of Contents
Advertisement
Preprocessor Interface Hardware Reference
Operating characteristics
Operating characteristics
The following operating characteristics are not specifications, but are typical
operating characteristics for the preprocessor interface.
Product Characteristics
Microprocessors Supported
Package Supported
Logic Analyzers Supported
Probes Required
Accessories required
Electrical Characteristics
Power Requirements
Signal Line Loading
Setup/Hold Requirement
Environmental Characteristics
Temperature
Altitude
Humidity
PowerPC 604
287-pin PGA
HP 1660A/AS,C/CS, HP 1670A/D, HP 16550A (two
cards), HP 16554A/55A/56A (two or three cards),
HP 165550/560 (two or three cards)
8 required for disassembly.
11 available.
None
120 mA@ 5V, supplied by the logic analyzer.
See diagrams on next page.
For address and data alignment, the PLO requires
thatthe ACK line have a 10.9 ns setup/0 s hold.
Operating
Operating
0 to+ 50 degrees C
+32to+131 degrees F
4,600 m
15,000 feet
Up to 75% noncondensing. Avoid sudden, extreme
temperature changes which could cause
condensation on the circuit board.
E2465A Power PC 604 Preprocessor
3-3
Advertisement
Table of Contents
