Using The Timer; Setting The Wake-Up Timer - Pioneer XV-EV51 Operating Instructions Manual

12

Using the timer

Setting the wake-up timer

Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
• The clock must be set to the correct
time for the wake-up timer to work
properly (see page 26).
• You can't have the record timer and the
wake-up timer set at the same time.
1 Select the source you want played.
For example, press FM/AM (TUNER on the
front panel) to select the radio as your
source.
2 Prepare the source.
For example, tune in the radio station you
want to wake up to.
If you've selected a CD or tape, make sure
that it's stopped.
68
En
STANDBY/ON
DVD/CD TAPE FM/AM LINE
AUDIO SUBTITLE ANGLE ZOOM
DSP DVD DISP
SURROUND ADVANCED MONO SYSTEM DISP
I — — i
KEYCON
KARAOKE ECHO TIMER MUTE
CLOCK ADJ.
VOLUME
SYSTEM SETUP TOP MENU
TUNE +
DVD SETUP DVD MENU
ENTER
SOUND
RETURN
MODE
TUNE –
3 Set the volume.
4 Press TIMER/CLOCK ADJ.
5 Use the buttons to select WAKE-
/
UP.
On the front panel use 4/1 and ¡/
¢.
6 Press ENTER.
7 Use the buttons to select EDIT.
/
On the front panel use 4/1 and ¡/
¢.
8 Press ENTER.
9 Set the switch-on time.
buttons (4/1 and ¡/¢
Use the
/
on the front panel) to set the hour, then press
ENTER. Set the minute in the same way,
pressing ENTER when you're done.
10 Set the switch-off time.
buttons (4/1 and ¡/¢
Use the
/
on the front panel) to set the hour, then press
ENTER. Set the minute in the same way,
pressing ENTER when you're done.
After pressing ENTER this last time, the
switch-on and switch-off times are confirmed
in the display.
11 Switch the system into standby mode.
WAKE-UP and the timer indicator (
in the display to confirm that it's set.
• The wake-up timer will not work if the
system is left on!
) show