Automatically Recording Cds (Ases) - Pioneer XV-EV51 Operating Instructions Manual

Using the tape deck
DVD/CD
– VOLUME
4/1
TUNING – PLAY/PAUSE
TUNER
OPEN/CLOSE
DOLBY NR(DEMO)
ASES
MIC VOL
1 Press TAPE then load a cassette into
the tape deck.
In order to follow these instructions more
easily, load the cassette with side A facing
up, then use the front panel controls.
2 Check the recording direction.
If you start recording in the 3 direction, both
sides of the tape can be recorded (unless the
erase protect tab for side B is missing). If you
switch sides and start recording in the 2
direction, then recording will start from side
B and stop when the end of the tape is
reached.
If you need to change the direction, press
PLAY/PAUSE (23) twice, then STOP (7).
3 Turn Dolby NR on or off as required.
Using Dolby NR improves the sound quality
of tape recordings that are going to be
played on Dolby NR equipped players. If the
tape is not going to be played on a tape deck
with Dolby NR (or if you're not sure), you
should leave Dolby NR off.
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D
symbol are trademarks of Dolby Laboratories.
TAPE
+
¡/¢
STOP TUNING +
LINE
REVERSE MODE
REC/STOP
4 Set the reverse mode (page 54).
• " (record one side only)
• [ or " (record both sides if recording
starts in the 3 (forward) direction, or
one side if recording starts in the 2
(reverse) direction)
5 Select the source you want to record.
For example, press TUNER (FM/AM on the
remote) to record from the radio. If you've
selected a CD, make sure that it's stopped.
You can't record while TAPE is selected.
6 Prepare the source for recording.
For example, tune in the radio station.
7 Press REC/STOP (front panel only).
The REC indicator lights in the display and
the deck starts recording.
8 Start the source playing (if necessary).
9 When you're ready to stop recording,
press REC/STOP again.
Automatically recording CDs
(ASES)
Auto Synchro Editing System (ASES for
short) makes recording CDs (including those
with MP3 audio files) automatic. It also
makes sure that a CD track isn't spread over
two sides of a tape.
If the tape runs out midway through a CD
track, the same track is automatically
recorded from the beginning again on the
other side.
08
57
En