05
Setting up for surround sound (EV51DVD only)
LFE attenuator setting (page 35)
Specify the peak level for the LFE
channel.
Subwoofer setting (page 35)
Specify how the subwoofer is used.
4
Use the
buttons to adjust the setting.
5
Repeat steps 3 and 4 to make other
settings.
6
When you're done, press SYSTEM
SETUP to exit.
• The setting display is automatically
exited after 20 seconds of inactivity.
Front speaker distance setting
• Default setting: 3.0 m
•
Use
/
front speakers from your main listening
position (within a 9 meter range).
Center speaker distance setting
• Default setting: 3.0 m
•
Use
/
center speaker from your main listening
position (within a 9 meter range).
34
En
(cursor up/down)
/
to set the distance of the
to set the distance of the
Surround speaker distance
setting
• Default setting: 3.0 m
•
Use
to set the distance of the
/
surround speakers from your main
listening position (within a 9 meter
range).
Dynamic range control setting
• Default setting: OFF
Dynamic range is the difference between the
loudest and softest sounds in any given
signal. With this setting, you can compress
the dynamic range of Dolby digital sound-
tracks so that low level sounds can be heard
more easily (sounding relatively louder), yet
louder sounds won't be too overbearing.
•
Press
to set the dynamic range
/
control (OFF, MID or HIGH).
• When the volume level is increased, set
to OFF.
• When listening at low volumes, set to
HIGH for maximum dynamic range
compression.
• Dynamic range control is effective only
when a Dolby Digital signal is being
played back.