06
Playing discs
2
Select 'Program' from the list of
functions on the left.
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
3
Select a program play function.
• Create/Edit – See above
• Playback Start – Starts playback of a
saved program list
• Playback Stop – Turns off program play,
but does not erase the program list
• Program Delete – Erases the program
list and turns off program play
• Program Memory (DVD only) – Select
On to save the program list for the disc
loaded. (Select Off to cancel the
program memory for the disc loaded)
• Program lists are saved for the disc
loaded. When you load a disc with a
saved program list, program play is
automatically turned on.
• You can save program lists for up to 24
discs. After that, the oldest one is
replaced with the most recent one
saved.
46
En
Create/Edit
Playback Start
Playback Stop
Program Delete
‰
Program Memory
Off
Using the front panel display
Even though the OSD is available for CDs
and MP3 discs, the front panel display
provides enough information to make a
program list easily.
1
Make sure the disc is stopped, then
press PROGRAM (SHIFT+1).
You're prompted to enter the first track in the
program list.
POO
• The total time for the program list is not
shown with MP3s.
2
Use the number buttons to select a
folder/track for the current step in the
program list then press ENTER.
After selecting a folder on an MP3 disc,
select a track in the same way.
For MP3s you can also use the
to choose folder input mode or track input
mode and the
buttons to select folder
/
numbers or track numbers.
P O 1
Wait for the display to prompt you after
completing each selection. If you make a
mistake, press CLEAR to delete the last
(most recently) programmed track.
3
Repeat step 2 to build up a program
list.
A program list can contain up to 24 steps.
To play the program list, press 3
4
(play).
Program play remains active until you press
7(stop), clear the playlist (see below), eject
the disc or switch off the player.
O'OO"
/
buttons
0 3