Table of Contents
Advertisement
Recording
• While the DVD/HDD is stopped, you can also use the
number buttons on the remote to select the channel
(for channel 6, press 6 then ENTER; for channel 24,
press 2, 4 then ENTER), or the –/
on the front panel.
3
Use the REC MODE button to set the picture
quality/recording time.
• See Setting the picture quality/recording time on
page 46 for detailed instructions.
4
Use the AUDIO button to select the audio
channel to record.
See Changing audio channels on page 23 for more on
this.
Press ì REC to start recording.
5
If you want to set a recording end time, press the ì REC
button repeatedly. The recording time increases in 30
minute increments, up to a maximum of six hours. The
time the recording will end is shown on-screen and in the
front panel display. When the recording ends, the system
automatically switches into standby if the input function
is set to DVD or HDD and no other operation is being
performed.
• To cancel the set recording time, press ì REC.
• If you want to pause recording at any time, press
PAUSE. Press again to restart the recording. (If
recording to the HDD or in VR mode, a new chapter
is started after recording restarts)
• You can change the input function (to FM/AM for
example) during recording without affecting the
recording.
6
To stop the recording, press
• If you set the recording time in the previous step,
you can still stop the recording anytime by pressing
STOP REC.
• Recording will stop automatically when there is no
more space on the HDD/DVD, or after six hours of
HDD recording (whichever is sooner).
• You can only stop recording when the input function
is set to DVD or HDD.
Setting a timer recording
+/
VR mode
buttons
Using the timer recording features you can program up
to 32 timer recordings up to a month in advance. Timer
recording programs can be set to record just once, every
day, or every week.
You can set the recording quality for your timer recording
in the same way as for a regular recording, but with the
added option of an AUTO mode, which maximizes the
recording quality for the space available on the disc (if
recording to DVD), or to fit on to a blank DVD disc (if
recording to HDD).
You can set timer recordings to record to a recordable
DVD or to the hard disk drive. For regular (daily or weekly)
HDD timer recordings that you don't need to keep, you
can use the Auto Replace Recording feature to
automatically replace the previous timer recording with
the new one. Note that when you use this feature, the
previous recording made on that timer program will be
replaced by the next one, regardless of whether you have
watched it yet or not.
You can also set the system so that it will adjust the
recording quality to try and fit the recording on to the disc
if it would not otherwise fit at the recording quality you set
(see Optimized Rec on page 109 for more on this).
Finally, if you set a timer recording to record to DVD but
there isn't a recordable DVD loaded at the time of the
recording, the Recovery Recording feature will
automatically record the program to the HDD for you.
STOP REC.
• A timer recording can't be set if:
• Timer recording will not start if:
• Timer recording will start when the operation
• If a recordable DVD that doesn't support
• The timer indicator (
Video mode
HDD
Important
– Auto Start Recording is in progress.
– There are already 32 timer programs waiting to be
recorded.
– The system is already recording.
– A disc is being initialized, finalized or unfinalized.
preventing timer recording has finished.
simultaneous playback and recording (see
Simultaneous recording and playback on page 53) is
playing when a DVD timer recording is due to start,
playback will automatically stop to allow the
recording to start.
) lights in the front panel
display when the timer is active. If the indicator is
blinking it means that (for a DVD timer recording)
there is no disc loaded, or the disc loaded is not
recordable (for an HDD timer recording) it means
that the HDD is not recordable.
06
47
En
Advertisement
Table of Contents
